Oak cabinets are an excellent way to upgrade your house. Cabinets from Oak were at one time extremely common. But now they give the old look. We are going to Share complete guide about how to Paint Oak Cabinets without grain showing.
However, oak cabinets are also made very well. They are durable, resistant to dentures and have strong boxes which make them almost indestructible.
How to Paint Oak Cabinets Without Grain Showing
Instead of solid wood, modern inexpensive cabinets are typically made of wood composite. This makes denting, scratching and water damage easier. So paint them rather than replace the oak cabinets!
It is not difficult, if you obey those simple directions, to paint your wood cabinets. In addition, the wood grain, the large primer and a paint of high quality have to be filled with a product.
1. Take out the cabinet doors and drawers:
By removing any torches that hold it you may remove doors and drawers from the box.
This is to decompose the hinge hardware for doors. Screw them off, both from the doors and from the cabinet and paint them all. If your goal is to reuse the hardware, be sure to keep it in a little baggy.
Typically, small screws are on the inside of the drawer’s front to remove the drawer fronts. Either you can unscrew them, paint your face, or simply remove the entire drawer. Screw out of front of the drawer the knobs or pulls.
Sand the grain wood with moderate sandpaper. This provides a nice surface to stick to your base and paint.
You can work much quicker if you have a mouse sander. But no worries if not. The cabinet foundation, drawer fronts and doors are not too difficult to sand manually.
Remember to go in a steady pressure to the wood grain and to sand. This means that there are no sandpaper lines in the wood.
Get through all the cracks and fissures to make sure the paint stays around.
Take a wet sanding rag or tackle and scrape all sanding dust until you have finished sanding. You don’t want your paint to join.
3. Hiding the Wood Grain
The wood grain is shielded from a lot of different items. Aqua Coat is one of the most widely used materials to cover wood grain. The grain is filled and sanded quickly.
Another I saw (and tried myself) used is spackle. This filling method of wood grain is not recommended. I noticed that the bucket will stick my paint out of the wood grain. Not good for a smooth completion!
This is the project I have been using – putting trimming on an island in the kitchen. Durham’s Wood Putty is a third product which works very well in hiding wood grain.
To use the Wood Putty from Durham, start by placing some of the wood mastic into a unit. Add some water and start mixing. For how much water you need, there is no magic formula. You go for a certain degree of coherence. You’re able to go when your ass is a little bigger, or the consistency of peanut butter.
Only add more butterfly powder if you add too much vapor. Add a little more water if your mixture is too dry. It is a very easy product to deal with and to sand well and to fill wood grain to where it exists digitally. Oh, plus, as a rock, it dries and lends you a sweet, lasting finish.
Thus use a spatula to drive you through the entire woods surface until the water misty is blended. Make sure you don’t leave on the wood more than you need because that stuff really gets tough. When sands are perfect and it’s smooth (because they’re so long-lasting), it’s hard to sand (because it is that long-lasting), just add what’s required and not more, hoping you can just sand off it later.
You may try some kind of tool to set it up for areas that are not smooth. I’ve used my fingertips to spread the water butt in extremely challenging areas.
Mind, remove any surplus while the puddle is still damp. It can now be done much better than later. Offer a light sand to remove unnecessary button spots after the wood putty has dried.
You may wonder if your cabinets really have to be prepared. That’s what you do. Priming helps to adhere the wood to the paint. After a coat of first coat is painted on the top layer, let it dry. Good news – You just need a first coat.
You are ready to paint when the first is dry. Paint in smooth and long strokes and take care not to drop on the paper. But ensure that all spots are covered equally, two coats should suffice. You should attach the hardware and set the doors and drawers when your paint is fully dry. Paint normally takes up to one (or more) week to cure fully. So while it will appear dry a few hours later, for a week or two, you want to take care of the freshly painted surface.
It is a simple way to achieve the perfect finish on your oak cabinets using water mast. Furthermore, the water putty is super polyvalent, so in your DIY arsenal it’s a great commodity.
- You can also Check: Best Semi Transparent Deck Stains
Ok, would you like to know the key to smooth cabinet finish?
For this reason, some people use paint sprays. However, interestingly, with the aid of your foam roller you can also get a really smooth finish.
The foam rollers naturally paint the surfaces smoothly, but they also leave tiny bubbles on the spatula.
Scrape the painted surface only prior to the last paint coat with sandpaper to prevent this.
Now, when the surface is silky, add the last coat of paint and take the white painted oak cabinets to a professional look.
Finally, wait until the paint has dried and all the doors and drawers have been re-assembled.Point to be noted
Drying time can vary, however ensure that the cabinets are mild in the coming weeks depending on the type of paint used. Finally, the freshly painted white oak case can be even more stunning by adjusting the sleeve and pulls.
- You can also Check: Best Epoxy Resins For Wood
We are sorry that if this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?